Solinst 102 Water Level Meter

Overview

The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength.

The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable.

Features & Benefits

  • Easy access battery drawer
  • Enhanced ergonomics
  • Coaxial cable – not flat tape
  • Simple electronics removal
  • Tape guide included
  • Carry Bag (Optional)

Applications

  • Monitoring the groundwater depths of groundwater and environmental monitoring wells.

Technical Specifications

Refer to Product Brochure (Download below)

Models Available

Solinst 102 Water Level Meters are available in the following lengths:

  • 15m (50ft)
  • 30m (100ft)
  • 50m (165ft)
  • 60m (200ft)
  • 80m (260ft)
  • 100m (330ft)
  • 125m (400ft)
  • 150m (500ft)
  • 200m (650ft)
  • 250m (800ft)
  • 300m (1000ft)
  • 400m (1300ft)

ECO Environmental now offers the Inspectra Laser methane gas detector for hire. The Inspectra Laser is a methane-specific monitoring device which is ATEX rated and can detect from as low as 1ppm.More...